Standard - (Т). Monoblock plants - wastewater treatment
Monobloc plants "Standart" type are designed for deep biological wastewater treatment with capacity from 1,5 to 8 m3/day. BIOTAL-T (Standart) plants are standart, including aerated Stainless steel grid for coarse impurities detention, three-tiered SBR-reactor and tertiary clarifier – storage of treated wastewater. For this type of plant separate pit for surplus activated sludge accumulation should be installed.
Polypropylene cylindrical bioreactor zoned cleaning, located in an underground ferroconcrete pit at a distance of not less than 5 m from the building, followed by concreting the gap between the reactor and the pit. Cables and ducts are installed in enclosures. From the perspective of the installation of electrical equipment for monobloc plant, there are two types of plants: - BIOTAL plant with box-recuperator, in which are already mounted control unit and compressors. The box-recuperator lid is made of polypropylene sheet. - BIOTAL plant, control unit and compressors of which should be laid down in the basement utility room or other building. Compressors, simultaneously with the air supply to the plant, make ventilation of the building in which they are located. There is a possibility to install treated water drain pump – in the tertiary clarifier – treated water storage. That is why there is no necessity to install additionally clean water reservoir. Can be installed with polypropylene overstructure.
Pay attention! For monobloc BIOTAL plant, including control unit and compressors NITTO warranty is 3 years.